Perfect for those cold wheeling trips. Includes hood and front “hand-warming” pocket. Features embroidered “Ballistic Fabrication” and skull logo on left chest . Black. Large, XL or XXL(+2).
OFFSET ES2234L. Jam nut sold separately.
Use to offset your steering linkages forward a full inch for additional clearance from brackets or aftermarket differential covers. Maximum angle for the ...
9.5'' FJ80 Toyota Rear Diff Armor Skid Plate MRK 2
Protect your rear axle!
'91-'97 FJ80 Toyota 9.5'' rear diff armor skid plate. Includes diff armor, skid plate, and formed tie in bracket. This...
2.625" Aluminum Mockup Bushing
Don't Burn Your Poly While Welding!
Aluminum mock-up bushing for 2.625" Ballistic Bushing. Used for setting bracket widths during mock-up and to stop your bushin...
Dana 60 Weld-On Brake Caliper Brackets
Get The Stopping Power You Need
Weld-on caliper mounts for the Dana 60 axles with 3.125" axle tubes. Made from 3/8" Steel in a strong, yet light weight...
(Does not fit Rubicon models, trimming will be required to clear the disconnect sway bar bracket)
JK Front Bumper, shipped fully welded. Cut from .250" steel and CNC formed on our 5-axis press bra...
Coil Spring Plate
For Custom Suspension
If you are adding a custom coil spring suspension to your rig, save time and money with these coil spring plates. Coil spring plate recommended for ...
Rockwell 2.5Ton Shave Kit
Gain 1.5" of Ground Clearance! Ships fully welded
Includes a differential cover CNC laser cut and CNC Press formed from 3/8" steel plate. Gain an additional 1.5" in...
Frame Mount Ballistic Joint
More Flex = More Traction
Ballistic Frame Mounts for use with 3.0", 2.63" Ultra Duty Ballistic Joints or our 2.63", 2.0" Poly Bushings. Give your leaf spring more...
1st Gen Tacoma BPV Relocation Bracket
Mutiple Options Up To 6" Of Lift
Just installed a new lift kit? Maybe going higher? Offers multiple relocation options for the Brake Proportioning Va...
Dana 35 Differential Cover
Welded 3/8" Steel
Dana 35 Differential Cover. CNC Laser cut and CNC Press formed 8 times from one piece. The ultra thick 3/8" flange resists pulling off of the s...
Dana 60 High Steer Space 1"
Clear Springs and Rocks
Dana 60 High Steer Spacer 1.0" allows for more clearance over leaf packs. Includes one 1.0" thick round spacer (not shown) that maintains ...
Ballistic Hawse Aluminum Fairlead
Durable Design
Made from 6061-T6 Aerospace Aluminum. Class 2 Type 2 Hard Black anodized. Features a standard 10 inch bolt spacing. CNC machined in-house from 1....
Ballistic D35 Die Hard Platinum Battery Box - P-5
Secure Your Battery the Right Way
The Ballistic D35 Die Hard Battery Box is perfect for safely mounting your Die Hard Platinum battery. CNC la...
Nissan M226 Differential Cover
Welded 3/8" Steel
The Nissan M226 Differential Cover is made from 3/8" steel. CNC Laser cut and CNC Press formed 8 times from one piece. The ultra thick 3/8...
Rockwell Link Brackets - 15 Degree Angle
Stout Lower Link
Lower link mounts for a 2.5T rockwell axle. The link mounts are angled at 15 degrees for triangulated lower links. This design wrap...
Pre-machined Gear Reverse Cut (high pinion) Ring & Pinion. For use with our Ford High Pinion King Pin Dana 60 Shave Kit and '04 - '16 Ford Super Duty Dana 60 Shave Kits. These gears have bee...
100% Machined In the U.S.
Using Domestic and Imported Materials
4140 Hardened Chromoly Housing and Spanner Nut
Hardened 416 Stainless Steel Ball
Polyurethane Races manufactured by Prothane
Adj...
Lower Axle Link Brackets
CNC Laser Cut and Press Formed
4 link or 3 link lower link axle mount kits: Includes 2 link bracket kits to complete one axle. Plates 'self-jig' and are designed for ease...
Single Poly Bushing with DOM Sleeve
Weldable 1/4" thick housing!
Single poly bushing with 2.5" or 3" overall mounting width and 1.50" minor diameter 1.75" major diameter and 2.0" OD Heavy Dut...
Axle tube Shock bracket
Strong mounts In a simple design
Coil Over / Shock mount boxed design. Cut from 3/16" plate for a .5" boltMounting width for shock is 1.50" and Coped for 3.0" axle tube b...
High Clearance Shock Tabs
When Space Is Limited
High Clearance Shock Tabs. For use with shocks, coilovers, and air shocks. Made from .250" steel with a 1/2" bolt diameter. Available for moun...
