Collection:
Product Feed
331 products
Pre-Machined Gear for GM 14 Bolt Shave Kit
Pre-turned Gear Ring & Pinion. For use with our 14 Bolt Shave Kit. These gears have been machined to 10.000" and are ready to use with our 14 bolt shave kits!
20% Off
Dana 70 Weld-On Brake Caliper Brackets
Dana 70 Weld-On Brake Caliper Brackets
Ditch Your Drum Brakes
Weld-on caliper mounts for the Dana 70 axles with 3.5" axle tubes at the ends. Made from 3/8" Steel in a strong, yet light weight ...
GM 14 Bolt 9.5 in Semi Float Differential Cover
GM 14 Bolt 9.5" Semi Float Differential Cover
Welded 3/8" Steel
9.5" 14 Bolt Semi Float Differential Cover made from 3/8" steel. CNC Laser cut and CNC Press formed from one piece. The ultra...
Jeep Billet upper arm tower with optional 3/4 in Uniball Conversion Kit
Tired of wearing out those upper control arm bushings? Have you bent the bracket, reinforced and bent it again? Need more articulation from the axle end joints?
CNC Machined from billet 1.0" thick ...
Race Style Chromoly 1.0 in - 14 tpi Tube Adapter 1.25 in - 1.5 in
Race Style Chromoly -Tube Adapter
4130 Chromoly Tube Adapter 1.0" 14 tpi Race Style
Right hand only
Machined from solid 4130 Chromoly, these tube adapters are designed with maximum strength...
Ballistic Uniball
The Ultimate Uniball
Using the best materials available we have created a rebuildable uniball that offers up to 62 degrees of misalignment using a 3.0" mounting width configuration, and 50 degre...
Weld-In Inspection Plug/Fill Cap
Weld-In Inspection Plug/Fill Cap
Spice up your Diff cover or aluminum tank with a weld-in inspection Plug/Fill Cap. Cap is machined from 6061-T6 aluminum and anodized red. Aluminum bung is made...
Axle Link / Coil Mount Brackets (Pair)
Axle Link / Coil Mount Brackets
The Perfect Mounting Point
Make use of valuable axle tube space to it's fullest with a Ballistic Fabrication combined coil / suspension link mounts. Spaced fo...
Jeep Upper Control Arm C Clasp 2.0 in Mounting Width (Pair)
Control arm clasp with a 2" mounting width and a 1/2" bore for use with our 2" Ballistic Joints. Please note that factory upper control arm bushings on many Jeeps use a 7/16" bolt hole. Please sele...
OFFSET ES2234R Chevy Tie Rod End 7/8 18 tpi
OFFSET ES2234R. Jam nut sold separately.
Use to offset your steering linkages forward a full inch for additional clearance from brackets or aftermarket differential covers. Maximum angle for the ...
Dana 60 Kingpin Outer Knuckle Bolt Tie In (FORD)
Dana 60 Out Knuckle Bolt Tie In
Beef Up Your Knuckles
Increase the strength of your Ford Dana 60 Kingpin Outer Knuckles with the use of our Dana 60 Kingpin Outer Knuckle Bolt Tie In.
...
10.25 / 10.5 Sterling Truss
10.5" Sterling Rear Axle Truss
The One Ton Sterling Bolt Truss System
Shave Axles must use 10.25" Master Overhaul Kit, which is the STRONGEST, even regardless if you are running a 10.5" or 10...
416 SS HARDENED High Misalignment Spacer for 1/2 in to 3/8 in
High Misalignment Spacer - Made In The USA
303 SS High Misalignment Spacer for 1/2" to 3/8"
1/2" to 3/8" for 1/2" rod end. Total mounting width when in a rod end is 1.5". Sold individually.
...
3/8 in -24 tpi Tube Adapter
Tube Adapter
3/8" -24 tpi
1026 Cold Rolled Steel Tube adapter 3/8" -24tpi
What's Included
One (1) Tube Adapter
INSTALLATION INSTRUCTIONS HERE
Adjustable Link Brackets for 2.5 x 2.5 Cross Member
Adjustable Link Brackets For 2.5" x 2.5" Cross Member
A Simple Upper Link Mount
Upper adjustable link mount for a 2.5"x 2.5" or a 2.0" x 2.0" square cross-member. Cut from .250" steel. Ho...
Dana 60 Rear Truss
Rear Dana 60 Truss with Diff Cover
This truss system is designed for 4-link capability on a rear Dana 60 axle. The boxed .250" plate provides maximum strength for the most hardcore wheelers. Trus...
Rockwell Link Brackets w/ Coilover Mount (Pair)
Rockwell Link Brackets - Coilover Mount
Combo Lower Link and Mount
Lower link and coilover mounts for a 2.5T rockwell axle. The link mounts are can be straight or angled at 15 degrees for tr...
Ballistic Novelty Letter Opener
Open your letters in pure style with this Ballistic themed letter opener. Made from laser cut 1/8" A36 mild steel. Comes un-sharpened and ready to customize to your liking.
Offset Leaf Spring Shackles
Offset Leaf Spring Shackles
Perfect for Spring Swaps
Made from .375" plate. Offset 1/4" for a total difference of 1/2". Holes are 9/16" to match our leaf spring bushings. Includes 4 pieces ...
Ballistic Fab Hooded Sweatshirt
Perfect for those cold wheeling trips. Includes hood and front “hand-warming” pocket. Features embroidered “Ballistic Fabrication” and skull logo on left chest . Black. Large, XL or XXL(+2).
OFFSET ES2234L Chevy Tie Rod End 7/8 18 tpi
OFFSET ES2234L. Jam nut sold separately.
Use to offset your steering linkages forward a full inch for additional clearance from brackets or aftermarket differential covers. Maximum angle for the ...
Jam Nut
Jam Nut
Zinc coated Jam nut. Use these with all suspension joints to lock threads in place. Price per Jam nut.
What's Included
One (1) Jam Nut
Forged Chromoly 2.63 in Ballistic Joint
100% Machined In the U.S.
Using Domestic and Imported Materials
4140 Hardened Chromoly Housing and Spanner Nut
Hardened 416 Stainless Steel Ball
Polyurethane Races manufactured by Prothane
Adj...
1.25 in -12 tpi Tube Adapter
Tube Adapter
1.25" -12 tpi
1020 CRS Tube adapter 1.25" -12tpi
What's Included
One (1) Tube Adapter
INSTALLATION INSTRUCTIONS HERE
7/8 in -14 tpi Tube Adapter
Tube Adapter
7/8" -14 tpi
1020 CRS Tube adapter 7/8" -14tpi
Size 1: A: 1.0 in, B: 7/8 in 14 tpi, C: 1.25 in, D: 1.7 in, E: 7/8 in Size 2: A: 1.0 in, B: 7/8 in 14 tpi, C: 1.5 in, D: 1.75 ...
3/4 in -16 tpi Tube Adapter
Tube Adapter
3/4" -16 tpi
1020 CRS Tube adapter 3/4" -16tpi
Size 1: A: 1.0 in , B: 3/4 in 16 tpi, C: 1.25 in, D: 1.75 in, E: 7/8 in
Size 2: A: 1.0 in , B: 3/4 in 16 tpi, C: 1.5 in, D: 1....
Lower Axle Link Bracket (Pair)
Lower Axle Link Brackets
CNC Laser Cut and Press Formed
4 link or 3 link lower link axle mount kits: Includes 2 link bracket kits to complete one axle. Plates 'self-jig' and are designed for ease...
Single Poly Bushing with DOM Sleeve
Single Poly Bushing with DOM Sleeve
Weldable 1/4" thick housing!
Single poly bushing with 2.5" or 3" overall mounting width and 1.50" minor diameter 1.75" major diameter and 2.0" OD Heavy Dut...
Axle tube shock bracket (Pair)
Axle tube Shock bracket
Strong mounts In a simple design
Coil Over / Shock mount boxed design. Cut from 3/16" plate for a .5" boltMounting width for shock is 1.50" and Coped for 3.0" axle tube b...
1.0 in -14 tpi Tube Adapter
Tube Adapter
1.0" -14 tpi
1026 Cold Rolled Steel Tube adapter 1.0" -14tpi
What's Included
One (1) Tube Adapter
INSTALLATION INSTRUCTIONS HERE
High Clearance Shock Tabs
High Clearance Shock Tabs
When Space Is Limited
High Clearance Shock Tabs. For use with shocks, coilovers, and air shocks. Made from .250" steel with a 1/2" bolt diameter. Available for moun...
Use left/right arrows to navigate the slideshow or swipe left/right if using a mobile device