Dana 60 High Steer Kit For Kingpin Axles
Better Design, Better Clearance
After market bronze bushings require trimming to fit.
Most modern solid axle equipped trucks and Jeeps are equipped wi...
CNC machined in house from 1018 cold roll steel, these arms all feature 10 degree tierod end angle correction to lengthen the life of the joints. Passenger arm is two inches longer to allow e...
Dana 60 Kingpin Bushings Billet Bronze Or Synthetic Bushing options
Ballistic Fabrications’s bronze upper kingpin bushings for the Dana 60 knuckles are designed to replace the OEM nylon cone bushin...
Dana 60 High Steer Stud and Nut
Heavy Duty Design
8620 Chromoly hardened and plated Dana 60 High Steer Stud and nut. 1/2" 20 tpi. Use to replace stock studs or to add 5th stud capability...
Our part# HSA-612 Dana 60 Kingpin bronze bushings fit nice with these arms.
These are not your ordinary high steer arms. We have created the absolute end-all of Dana 60 Kingpin high steer arms. Met...
Dana 44 High Steer Stud Kit
Strong Studs for Your Dana 44
Dana 44 High Steer Stud kit includes ONE stud, ONE conical washer, and ONE locking nut. For use to replace factory studs or add an ad...
Dana 60 Out Knuckle Bolt Tie In
Beef Up Your Knuckles
Increase the strength of your Ford Dana 60 Kingpin Outer Knuckles with the use of our Dana 60 Kingpin Outer Knuckle Bolt Tie In.
...
Dana 60 High Steer Space 1"
Clear Springs and Rocks
Dana 60 High Steer Spacer 1.0" allows for more clearance over leaf packs. Includes one 1.0" thick round spacer (not shown) that maintains ...
Dana 44 High Steer Space 1"
Clear Springs and Rocks
Dana 44 High Steer Spacer 1.0" thick for use with High Steer Arms to clear leaf springs or for higher tie rod clearance. 4-hole design for ...
CNC machined in house from 1018 cold roll steel, these arms all feature 10 degree tierod end angle correction to lengthen the life of the joints. Passenger arm is two inches longer to allow e...
Dana 44 High Steer Space 1/2"
Clear Springs and Rocks
Dana 44 High Steer Spacer 0.5" thick for use with High Steer Arms to clear leaf springs or for higher tie rod clearance. 4-hole design fo...
Reid Racing HD Jeep JK High Steer Knuckles
Product Description:The new Jeep Wrangler JK Dana 30/Rubicon 44 knuckles are heavy duty stock replacement knuckles. Raised steering linkage, dual st...
Reid Racing HD Jeep JL/JT High Steer Knuckles
Product Description:The new Jeep JL/JT Dana 30/Rubicon 44 knuckles are heavy duty stock replacement knuckles. OEM knuckles are made out of Alum...
100% Machined In the U.S.
Using Domestic and Imported Materials
4140 Hardened Chromoly Housing and Spanner Nut
Hardened 416 Stainless Steel Ball
Polyurethane Races manufactured by Prothane
Adj...
Lower Axle Link Brackets
CNC Laser Cut and Press Formed
4 link or 3 link lower link axle mount kits: Includes 2 link bracket kits to complete one axle. Plates 'self-jig' and are designed for ease...
Single Poly Bushing with DOM Sleeve
Weldable 1/4" thick housing!
Single poly bushing with 2.5" or 3" overall mounting width and 1.50" minor diameter 1.75" major diameter and 2.0" OD Heavy Dut...
Axle tube Shock bracket
Strong mounts In a simple design
Coil Over / Shock mount boxed design. Cut from 3/16" plate for a .5" boltMounting width for shock is 1.50" and Coped for 3.0" axle tube b...
High Clearance Shock Tabs
When Space Is Limited
High Clearance Shock Tabs. For use with shocks, coilovers, and air shocks. Made from .250" steel with a 1/2" bolt diameter. Available for moun...
