CNC machined in house from 1018 cold roll steel, these arms all feature 10 degree tierod end angle correction to lengthen the life of the joints. Passenger arm is two inches longer to allow e...
Dana 70 Differential Cover
Welded 3/8" Steel
Dana 70 Differential Cover made from 3/8" steel. Features high face clearance for tight steering applications. CNC Laser cut and CNC Press formed...
If you looking to upgrade your vehicle by swapping in an inexpensive set of junkyard Ford Super Duty 2005+ (Coil Sprung) Dana 60 axles then look no further! Add a diff cover or even a shave kit tha...
Rockwell Link Bracket / Coil Spring Mount
CNC Laser Cut and Press Formed
Lower link bracket and coil mount combined into one bracket for a 2.5T rockwell axle. For use with 5.5" wide TJ front sp...
4 3/4"-16 CrMo high strength rod ends
4 Tube adapters for rod-ends machined from 1020 DOM steel
One 1.5"OD .250" wall tube for drag-link 43" long
One 1.5" OD.250" wall tube for tie-ro...
Pre-turned Gear Ring & Pinion. For use with our 2010 & down Ford Sterling 10.5" / 10.25" Shave Kit. These gears have been machined to 10.000" and are ready to install!
Jeep JK Axle Trac Bar Mount
This heavy duty bracket will replace your Jeep JK axle trac bar bracket and can also be used for universal applications. CNC cut on one of our 2 in house lasers f...
Ford Superduty Sterling 10.25" / 10.5" Rear Differential Cover for 1990 - Current Ford F250 and 1990 - 2016 Ford F350
The Sterling Differential Cover is made for the 1990 - Current Ford F250 a...
Dana 44 High Steer Space 1/2"
Clear Springs and Rocks
Dana 44 High Steer Spacer 0.5" thick for use with High Steer Arms to clear leaf springs or for higher tie rod clearance. 4-hole design fo...
Ballistic Bushing Upgrade Kit
For Use With Forged and Weldable Ballistic Bushings
Nylatron GSM bushings are harder than the red polyurethane that we normally supply with our 2.63 Ballistic Bush...
14 Bolt BUMP FORM MRK 3.3 Shave Kit
Greater Protection To Prevent Prone Rock Damage
Gain an additional 2 inches of ground clearance over stock with this kit. Bottom bolts are protected by the ...
Rockwell Link Brackets
Heavy Duty Brackets
Lower link mounts for a 2.5T rockwell axle. This design wraps around the axle tube for extra strength. Cut from .250" steel and CNC Press formed ...
Low Profile JKU Jeep Front Bumper with Integrated Winch Plate / Mount and Clevis Mounts
Includes 2 Bumper Clevis Mounts
Integrated Winch Plate and Fairlead mount
Weld-on for ultimate clearance and...
Rockwell Link Tower
Heavy Duty Suspension Components
Link towers make it easy to link your 2.5T Rockwell. Use one or two for various types of suspension styles. Cut from .250" plate. All ve...
Toyota FJ80 Rear Axle Truss
Link Mounts and Truss Combo
Fits 94-97 Rear Axle Truss with Toyota FJ80 axle. Laser cut from 3/16" steel and faetures an oversized upper link mount surface. Includes...
AAM 11.5 Shave Kit
Gain 1.75" of Clearance
AAM 11.5 Shave Kit is made from 1/4" steel body and a 3/8" thick Ring. CNC Laser cut and CNC Press formed 15 times and welded. The ultra thick 3/8"...
100% Machined In the U.S.
Using Domestic and Imported Materials
4140 Hardened Chromoly Housing and Spanner Nut
Hardened 416 Stainless Steel Ball
Polyurethane Races manufactured by Prothane
Adj...
Lower Axle Link Brackets
CNC Laser Cut and Press Formed
4 link or 3 link lower link axle mount kits: Includes 2 link bracket kits to complete one axle. Plates 'self-jig' and are designed for ease...
Single Poly Bushing with DOM Sleeve
Weldable 1/4" thick housing!
Single poly bushing with 2.5" or 3" overall mounting width and 1.50" minor diameter 1.75" major diameter and 2.0" OD Heavy Dut...
Axle tube Shock bracket
Strong mounts In a simple design
Coil Over / Shock mount boxed design. Cut from 3/16" plate for a .5" boltMounting width for shock is 1.50" and Coped for 3.0" axle tube b...
High Clearance Shock Tabs
When Space Is Limited
High Clearance Shock Tabs. For use with shocks, coilovers, and air shocks. Made from .250" steel with a 1/2" bolt diameter. Available for moun...
