High Misalignment Spacer - Made In The USA
416 Hardened SS High Misalignment Spacer for 3/4" to 5/8"
3/4" to 5/8" for 3/4 " rod end. Total mounting width when in a rod end is 1.75". Sold indi...
High Misalignment Spacer - Made In The USA
303 SS High Misalignment Spacer for 3/4" to 9/16".
3/4" to 9/16" for 3/4 " rod end. Sold individually.
Measurements A: 3/4 in B: 9/16 in C: 1.7...
High Misalignment Spacer - Made In The USA
303 SS High Misalignment Spacer for 5/8" to 1/2"
5/8" to 1/2" for 5/8" rod end. Total mounting width when in a rod end is 1.5". Sold individually.
...
High Misalignment Spacer - Made In The USA
303 SS High Misalignment Spacer for 7/8" to 5/8"
7/8" to 5/8 " for 7/8 " rod end. Total mounting width when in a rod end is 2.0". Sold individually....
High Misalignment Spacer - Made In The USA
303 SS High Misalignment Spacer for 7/8" to 9/16"
7/8" to 9/16" for 7/8 " rod end. Total mounting width when in a rod end is 2.0". Sold individually...
6 x 5.5" Spare Tire Mounting Point
Heavy Duty Mounting For Your Spare
6x5.5" Spare Tire Mounting Plate. Includes three loose 12x1.5" studs. Studs DO NOT come pre-installed. Made from 3/8" steel...
Tube Adapter
7/8" -18 tpi (Chevy Tie Rod Ends)
1026 Cold Rolled Steel Tube adapter 7/8" -18tpi for Chevy Tie Rod Ends
What's Included
One (1) Tube Adapter
INSTALLATION INSTRUCTIONS...
Tube Adapter
7/8" Square Tube Adapter
Use in square thin or heavy wall tubing with an inner dimension of 1.25". Fully machined on our lathe and 4th axis mill for concentricity and abi...
9 Inch Pinion Guard
Protect Your Pinion from Rock Damage
The Ballistic Fabrication pinion guards are designed to protect the vulnerable portion of the Ford 9” pinion from rocks and other fac...
Cage Gusset With Skull Cut Out
90 Degree Gusset
Add strength and safety to you cage with a Ballistic Skull gusset CNC laser cut from 3/16" plate measuring 4" by 4".
What's Included
One ...
Aam 11 5 Gen 1 Mrk2 Truss System by ballisticfab on Sketchfab
This truss system is designed for 4-link capability on a rear one ton AAM 11.5 axle. It serves as a link mount system for a 4 link, ...
AAM 11.5 Diff Cover
4 quarts additional oil capacity
AAM 11.5 Diff Cover made from 1/4" steel body and a 3/8" thick Ring. CNC Laser cut and CNC Press formed and welded. The ultra thick 3/8" ...
AAM 11.5 Shave Kit
Gain 1.75" of Clearance
AAM 11.5 Shave Kit is made from 1/4" steel body and a 3/8" thick Ring. CNC Laser cut and CNC Press formed 15 times and welded. The ultra thick 3/8"...
AAM 9.25 Differential Cover
Welded 3/8" Steel
AAM 9.25 Differential Cover made from 1/4" steel. CNC Laser cut and CNC Press formed 8 times from one piece. The ultra thick 3/8" flange res...
100% Machined In the U.S.
Using Domestic and Imported Materials
4140 Hardened Chromoly Housing and Spanner Nut
Hardened 416 Stainless Steel Ball
Polyurethane Races manufactured by Prothane
Adj...
Lower Axle Link Brackets
CNC Laser Cut and Press Formed
4 link or 3 link lower link axle mount kits: Includes 2 link bracket kits to complete one axle. Plates 'self-jig' and are designed for ease...
Single Poly Bushing with DOM Sleeve
Weldable 1/4" thick housing!
Single poly bushing with 2.5" or 3" overall mounting width and 1.50" minor diameter 1.75" major diameter and 2.0" OD Heavy Dut...
Axle tube Shock bracket
Strong mounts In a simple design
Coil Over / Shock mount boxed design. Cut from 3/16" plate for a .5" boltMounting width for shock is 1.50" and Coped for 3.0" axle tube b...
High Clearance Shock Tabs
When Space Is Limited
High Clearance Shock Tabs. For use with shocks, coilovers, and air shocks. Made from .250" steel with a 1/2" bolt diameter. Available for moun...
