Cage Gusset
Laser Cut!
Add strength and safety to your cage. All gussets cut from 3/16" plate measuring 3.5" x 3.5". Choose from 80, 90, or 100 degree gussets. Availabe in single gussest fo...
14 Bolt Shave Kit
Greater Ground Clearance Under Your Factory Axle
Gain an additional 2 inches of ground clearance over stock with this kit. Bottom bolts are countersunk for extra bolt protecti...
Ford 8.8 Axle Swap Kit For Jeep Wrangler TJ
Tired of Broke C-Clips and Bent Axles?
Time to swap out that tired, old Dana 35 axle under your Jeep TJ Wrangler? Look no further, our swap kit inc...
Ballistic Shock Eyelet Conversion Tabs
Convert Stud Mounts To Eyelet
Shock eyelet conversion tabs allow the use of a standard eyelet shock on a 'stud' mount commonly seen on many Jeep and For...
Tube Flange 2-Bolt Design
Weld-on Tube Flange cut from 3/16" plate. Holes are laser cut to 3/8".
What's Included
Two(2) Tube Flanges
INSTALLATION INSTRUCTIONS HERE
Heavy Duty Axle Tube Shock Tabs
Heavy Duty flat bottom shock tabs. Laser cut in-house from 3/8" steel with a 1/2" bolt hole diameter. Bottom of tab is 2 1/4" across
What's Included
Two (2...
KMX-10 FK Bearings Chromoly 5/8" Rod End
These joints are simply the strongest and best available with superior load ratings. Body is built from Chrome Moly alloy steel, heat treated and coated fo...
14 Bolt Bolt-On Caliper Bracket
Ditch Your Drum Brakes
Fits SRW Standard Housings Only
Bolt-on caliper mounts for 14 bolt axles with 3.25" axle tubes. Made from 3/8" steel for a strong desig...
Single Poly Bushing
Poly bushings designed and produced by Prothane exclusively for Ballistic Bushing housings.
Single poly bushing with 2.5" or 3" overall mounting width and 1.50" minor diam...
Cage Gusset With Holes
Laser Cut!
Add strength and safety to your cage. All gussets cut from 3/16" plate measuring 4" x 4". Choose from 80, 90, or 100 degree gussets. Price per gusset.
Wha...
For Use with our Forged & Weldable Ballistic Joints
Poly races designed and produced by Prothane exclusively for Ballistic Joint housings.
What's Included
One (1) Ballistic Joint Rebuild...
5", 6", 7" Separations from center of axle tube. 2.5, 2.75, 3.0, 3.125, 3.25, 3.5, 4.0 Axle Tube Sizes. 1.75 Mounting Width with 3/4" Hole. CNC cut on one of our 2 in house lasers from 1/4" mild...
Heavy Duty - Small Frame Mount
Heavy Duty Construction For Your Custom Rig
Heavy Duty - Small Link Mount designed to be welded to the bottom of the frame rail. Available in 3/16 inch thick p...
Heavy Duty 90 Degree Tabs
CNC Laser Cut
Heavy Duty tabs for mounting at 90 degrees off of square tubing. Great for mounting links on our axle trusses. Semi-wrap around design ensures a better...
Lower shock / Coilover shock Bracket with Perpendicular Bolt (pair)
Need a lower shock mount that allows you to inboard the tops of your shocks? Is your factory shock hangar beat up from the ro...
High Misalignment Spacer - Made In The USA
416 Hardened SS High Misalignment Spacer for 3/4" to 5/8"
3/4" to 5/8" for 3/4 " rod end. Total mounting width when in a rod end is 1.75". Sold indi...
Ballistic Weld-on Skull
Add Style To Your Project
Ballistic Fabrication weld-on skull. Measuring 3 inches tall by 2.5 inches wide. Laser cut from 1/8" steel with two holes for seamless welding to...
Adjustable Coil Buckets
Fine Tune Your Suspension Needs
Engineered for Solid Axle Swaps or those needing to Fine Tune their custom suspension. Adjustable coil bucket for coils up to 5.75" wide ...
Inner Frame Bracket / Lower Link Bracket COMBO
CNC Laser Cut and Press Formed
Combo set for a nearly complete link set up! Combine the BRK-1062 (0 or 22.5 degree) and BRK-1072 into one modula...
100% Machined In the U.S.
Using Domestic and Imported Materials
4140 Hardened Chromoly Housing and Spanner Nut
Hardened 416 Stainless Steel Ball
Polyurethane Races manufactured by Prothane
Adj...
Lower Axle Link Brackets
CNC Laser Cut and Press Formed
4 link or 3 link lower link axle mount kits: Includes 2 link bracket kits to complete one axle. Plates 'self-jig' and are designed for ease...
Axle tube Shock bracket
Strong mounts In a simple design
Coil Over / Shock mount boxed design. Cut from 3/16" plate for a .5" boltMounting width for shock is 1.50" and Coped for 3.0" axle tube b...
Single Poly Bushing with DOM Sleeve
Weldable 1/4" thick housing!
Single poly bushing with 2.5" or 3" overall mounting width and 1.50" minor diameter 1.75" major diameter and 2.0" OD Heavy Dut...
High Clearance Shock Tabs
When Space Is Limited
High Clearance Shock Tabs. For use with shocks, coilovers, and air shocks. Made from .250" steel with a 1/2" bolt diameter. Available for moun...
