Weld-On 14 Bolt Brake Caliper Brackets
Ditch Your Drum Brakes
Weld-on caliper mounts for 14 bolt and Eaton axles with 3.25" axle tubes. These brackets are made from 3/8" steel in a strong a...
Front Dana 30 Truss for Jeep XJ
This truss requires removal of stock bracketry for installation. For use with XJs equipped with Dana 30 front axle without vacuum disconnect. Truss is dimple ...
Ballistic 34/78 DUAL LONG Optima Battery Box
Secure Your Batteries the Right Way
The Ballistic 34/78 Dual Long Optima Battery Box is perfect for safely mounting two 34/78 Optima batteries lengt...
Uniball Cup 2.63"
The Uniball Cup 2.63" is machined for a 2.125" OD Uniball bearing with a 1" bore (available in drop down below). These cups are made from USA grade 1026 DOM steel. The diameter o...
Dana 44 Differential Cover
Welded 3/8" Steel
Dana 44 Differential Cover made from 3/8" steel. CNC Laser cut and CNC Press formed 8 times from one piece. The ultra thick 3/8" flange resists pulli...
14 Bolt Differential Cover
3/8" Steel
14 Bolt Differential Cover made from 3/8" steel. CNC Laser cut and CNC Press formed 8 times from one piece. The ultra thick 3/8" flange resists pulling o...
Offset Steering Kit 7/8" with High Misalignment Spacers
Strengthen Your Steering and Clear Your Stock Diff Cover!
Whats Included
2 7/8"-14 CrMo high strength rod ends
2 Offset 7/8"-14 CrMo high...
High Misalignment Spacer - Made In The USA
416 SS High Misalignment Spacer for 1.0" to 9/16"
1.0" to 9/16" for 1" and 1.25" rod ends w/ 1" ball. Total mounting width when in a rod end is 2...
416 Hardened SS Spacer 5/8 in.
Get The Clearance You Need
Spacer height is 7/16"and width 7/8. Total mounting width with a rod end is 1.625". Sold individually.
Machined from 416 Stainless Ste...
High Misalignment Spacer - Made In The USA
303 SS High Misalignment Spacer for 7/8" to 9/16"
7/8" to 9/16" for 7/8 " rod end. Total mounting width when in a rod end is 2.0". Sold individually...
Safety Washer
HARDENED 416 SS Safety Washer
Safety Washers are constructed from 416 Stainless Steel. While leaving room for deflection in the joint, these are designed to prevent the ball fr...
KIT-2305-01 - Bolt Kit: 1/2"-13 x 3.25" For use with Shocks and Coilovers
KIT-2305-02 - Bolt Kit: 9/16"-18 x 3.75" for use with BRK-1011-1
KIT-2305-11 - Bolt Kit: 9/16"-12 x 4.5" for use wi...
Ballistic Fabrication Windshield Sticker. Designed to be long and thin to maximize visibility on your windshield or rear window.
Measures: 3.5" x 35" Available in White, Black, or Red.
AAM 11.5 Diff Cover
4 quarts additional oil capacity
AAM 11.5 Diff Cover made from 1/4" steel body and a 3/8" thick Ring. CNC Laser cut and CNC Press formed and welded. The ultra thick 3/8" ...
Coil Plate Mounts with Retainers
CNC Laser Cute and Press Formed
Coil mount with formed axle mounts and inner gussets. Coil plate, retainer, and gusset laser cut from 1/4" plate. Bolt hole d...
Adjustable Shock Towers
Dial In Your Suspension Needs
Adjustable shock mounts for standard emulsion and remote reservoir shocks. Allows for up to 5" of vertical adjustment. Cut from 1/4" plate ...
3.375" Mounting Width with 11/16" Bolt hole
Interested in making links for your Super-duty or late model Dodge Ram? Combine with 2.0" OD tubing and your choice of suspension joint at the frame and...
Coil Spring Retainer
Don't Lose A Spring On The Trail
Coil spring retainer recommended for 5.5" TJ coils or equivalent. Cut from .250" steel, laser cut to .5". Part # BRK-1060
PRICE INCLU...
Wrap Around Link Brackets
Wrap around link brackets for round tube cross-member systems. Cut from 3/16" plate. Bolt hole diameter cut to 9/16". For use with 7/8" rod ends and smaller.
What's I...
100% Machined In the U.S.
Using Domestic and Imported Materials
4140 Hardened Chromoly Housing and Spanner Nut
Hardened 416 Stainless Steel Ball
Polyurethane Races manufactured by Prothane
Adj...
Lower Axle Link Brackets
CNC Laser Cut and Press Formed
4 link or 3 link lower link axle mount kits: Includes 2 link bracket kits to complete one axle. Plates 'self-jig' and are designed for ease...
Single Poly Bushing with DOM Sleeve
Weldable 1/4" thick housing!
Single poly bushing with 2.5" or 3" overall mounting width and 1.50" minor diameter 1.75" major diameter and 2.0" OD Heavy Dut...
Axle tube Shock bracket
Strong mounts In a simple design
Coil Over / Shock mount boxed design. Cut from 3/16" plate for a .5" boltMounting width for shock is 1.50" and Coped for 3.0" axle tube b...
High Clearance Shock Tabs
When Space Is Limited
High Clearance Shock Tabs. For use with shocks, coilovers, and air shocks. Made from .250" steel with a 1/2" bolt diameter. Available for moun...
