Collection:
In Stock - Made in house
333 products
HD Flat Bottom Shock Tabs
Heavy Duty Axle Tube Shock Tabs
Heavy Duty flat bottom shock tabs. Laser cut in-house from 3/8" steel with a 1/2" bolt hole diameter. Bottom of tab is 2 1/4" across
What's Included
Two (2...
HD Link Tabs For Round Tube
Heavy Duty Link Tabs
CNC Laser Cut For Tubing
Heavy Duty tabs for mounting to tubing. Great for mounting links or shocks for tube buggies. Laser cut in-house from 3/8" steel with a 9/16" bo...
20% Off
HD Tie Down Tabs
HD Tie Down Tabs
For Safe, Secure Loads
HD Tie Down Tabs. Sold as a pair. Great recovery point for straps and chains. CNC laser cut from 3/8" steel. Hole is 1.5" in diameter. Available for 2....
Heavy Duty Ballistic Forged Poly Bushing 2.63 in
100% machined in the USA using
domestic and foreign materials
The Heavy Duty 2.63" Forged Chromoly Ballistic Poly Bushing is made to be the ultimate in durability and ease of use. 100% machin...
Heavy Duty Clevis / D-ring Tab
Heavy Duty Clevis / D-Ring Tab
For The Ultimate Recovery Point
Heavy Duty Clevis / D-Ring Tabs are perfect for a 7/8" shackle or D-ring. CNC milled from solid 1" 1018 cold rolled steel, the...
Heavy Duty Frame Link Mount (Single)
Heavy Duty Frame Link Mount
Low Impact Profile
Frame bracket designed to be welded to the bottom of the frame rail. Self-jigging design spaced 2.63" inside for use with 2.63" Ballistic joi...
Heavy Duty Small Link Mount (Single)
Heavy Duty - Small Frame Mount
Heavy Duty Construction For Your Custom Rig
Heavy Duty - Small Link Mount designed to be welded to the bottom of the frame rail. Available in 3/16 inch thick p...
High Clearance Shock Tabs
High Clearance Shock Tabs
When Space Is Limited
High Clearance Shock Tabs. For use with shocks, coilovers, and air shocks. Made from .250" steel with a 1/2" bolt diameter. Available for moun...
I.D. Tube Clamp
I.D. Tube Clamp
Precise Fit and Stout Design
Weld in Inner Diameter Tube Clamps. CNC turned and CNC milled for a precise fit. Ideal for roll cages, engine bridges and other tube sections that...
Inner Frame Bracket / Lower Link Bracket COMBO
Inner Frame Bracket / Lower Link Bracket COMBO
CNC Laser Cut and Press Formed
Combo set for a nearly complete link set up! Combine the BRK-1062 (0 or 22.5 degree) and BRK-1072 into one modula...
Inner Frame Mount 0 degree offset (Single)
Inner Frame Mount 0 degree offset
CNC Laser Cut and Press Formed
Inner frame mount for straight or slightly offset upper links. Welds to inner frame rail and eliminates the need to drop the ...
Inner Frame Mount 22.5 Deg Offset (Single)
Inner Frame Mount
CNC Laser Cut and Press Formed
Inner frame mount available pre-set at 22.5 degrees for an overall 45 degrees of separation. Welds to inner frame rail and eliminates the need t...
Jam Nut
Jam Nut
Zinc coated Jam nut. Use these with all suspension joints to lock threads in place. Price per Jam nut.
What's Included
One (1) Jam Nut
Jeep Billet upper arm tower with optional 3/4 in Uniball Conversion Kit
Tired of wearing out those upper control arm bushings? Have you bent the bracket, reinforced and bent it again? Need more articulation from the axle end joints?
CNC Machined from billet 1.0" thick ...
Jeep JK Axle Trac Bar Mount
Jeep JK Axle Trac Bar Mount
This heavy duty bracket will replace your Jeep JK axle trac bar bracket and can also be used for universal applications. CNC cut on one of our 2 in house lasers f...
Jeep JK Dana 30 Differential Cover
Jeep JK Non-Rubicon Dana 30 Front Differential Cover
Now includes Integrated Magnetic Drain Plug
Welded 3/8" and 1/4" Steel
Need a bullet proof diff cover for your Jeep Dana 30 axle? Look no...
10% Off
Jeep JK Front Bumper
(Does not fit Rubicon models, trimming will be required to clear the disconnect sway bar bracket)
JK Front Bumper, shipped fully welded. Cut from .250" steel and CNC formed on our 5-axis press bra...
JEEP JK Lower Control Arm Skid Plates (Pair)
Beef up your lower control arm brackets on your Jeep JK and JKU!
Laser cut form .250" steel and precision formed on a CNC press
What's Included -
1 JEEP-1803-4A Passenger Side bracket
1 JEEP-1803-4...
Jeep JK Rubicon Universal Dana 44 Differential Cover
Jeep JK Rubicon Dana 44 Differential Cover
Now includes Integrated Magnetic Drain Plug
Welded 3/8" and 1/4" Steel
Need a bullet proof diff cover for your Jeep Rubicon Dana 44 axle? Look no...
Jeep JK/JL Inner Knuckle Gusset Set (Inner C's)
07+ Jeep JK/JL Dana 30 / 44 Inner Knuckle Gusset Set
Beef Up Your Dana44!
Add extra strength to the weakest part. Ensure a tough, reliable axle for many miles. Gusset set for reinforcing Da...
Jeep TJ 8.8 in Ford axle swap kit
Ford 8.8 Axle Swap Kit For Jeep Wrangler TJ
Tired of Broke C-Clips and Bent Axles?
Time to swap out that tired, old Dana 35 axle under your Jeep TJ Wrangler? Look no further, our swap kit inc...
Jam Nut
Jam Nut
Zinc coated Jam nut. Use these with all suspension joints to lock threads in place. Price per Jam nut.
What's Included
One (1) Jam Nut
Forged Chromoly 2.63 in Ballistic Joint
100% Machined In the U.S.
Using Domestic and Imported Materials
4140 Hardened Chromoly Housing and Spanner Nut
Hardened 416 Stainless Steel Ball
Polyurethane Races manufactured by Prothane
Adj...
1.25 in -12 tpi Tube Adapter
Tube Adapter
1.25" -12 tpi
1020 CRS Tube adapter 1.25" -12tpi
What's Included
One (1) Tube Adapter
INSTALLATION INSTRUCTIONS HERE
7/8 in -14 tpi Tube Adapter
Tube Adapter
7/8" -14 tpi
1020 CRS Tube adapter 7/8" -14tpi
Size 1: A: 1.0 in, B: 7/8 in 14 tpi, C: 1.25 in, D: 1.7 in, E: 7/8 in Size 2: A: 1.0 in, B: 7/8 in 14 tpi, C: 1.5 in, D: 1.75 ...
3/4 in -16 tpi Tube Adapter
Tube Adapter
3/4" -16 tpi
1020 CRS Tube adapter 3/4" -16tpi
Size 1: A: 1.0 in , B: 3/4 in 16 tpi, C: 1.25 in, D: 1.75 in, E: 7/8 in
Size 2: A: 1.0 in , B: 3/4 in 16 tpi, C: 1.5 in, D: 1....
Lower Axle Link Bracket (Pair)
Lower Axle Link Brackets
CNC Laser Cut and Press Formed
4 link or 3 link lower link axle mount kits: Includes 2 link bracket kits to complete one axle. Plates 'self-jig' and are designed for ease...
Single Poly Bushing with DOM Sleeve
Single Poly Bushing with DOM Sleeve
Weldable 1/4" thick housing!
Single poly bushing with 2.5" or 3" overall mounting width and 1.50" minor diameter 1.75" major diameter and 2.0" OD Heavy Dut...
Axle tube shock bracket (Pair)
Axle tube Shock bracket
Strong mounts In a simple design
Coil Over / Shock mount boxed design. Cut from 3/16" plate for a .5" boltMounting width for shock is 1.50" and Coped for 3.0" axle tube b...
1.0 in -14 tpi Tube Adapter
Tube Adapter
1.0" -14 tpi
1026 Cold Rolled Steel Tube adapter 1.0" -14tpi
What's Included
One (1) Tube Adapter
INSTALLATION INSTRUCTIONS HERE
High Clearance Shock Tabs
High Clearance Shock Tabs
When Space Is Limited
High Clearance Shock Tabs. For use with shocks, coilovers, and air shocks. Made from .250" steel with a 1/2" bolt diameter. Available for moun...
Use left/right arrows to navigate the slideshow or swipe left/right if using a mobile device