Shock Bungs
CNC Turned from 1.0" .250 wall 1020 DOM tubing, these pieces allow misalignment in the shock eye as well as provide a manner of attaching shocks to non-parallel surfaces.
...
Ballistic Shock Eyelet Conversion Tabs
Convert Stud Mounts To Eyelet
Shock eyelet conversion tabs allow the use of a standard eyelet shock on a 'stud' mount commonly seen on many Jeep and For...
Shock Hoop Brackets
For Custom Shock Set Ups
Mount your shocks or coilovers to your tube chassis or custom shock hoops with these brackets. This is the bracket from our Shock Hoop Kit. This b...
Complete Shock Hoop Kit
Smooth Out Your Rough Ride
Looking for an easy and inexpensive way to mount larger shocks to a vehicle that was not set up for them? Ballistic Fabrication's shock hoop...
Shock Tabs
Heavy Duty Parts For Heavy Duty Projects
Weld-on shock tabs, strong enough for coil overs. Radius cut for a variety of tube diameters. Bolt hole diameter.5".
What's Included
Two ...
Single Poly Bushing
Poly bushings designed and produced by Prothane exclusively for Ballistic Bushing housings.
Single poly bushing with 2.5" or 3" overall mounting width and 1.50" minor diam...
Single Poly Bushing with DOM Sleeve
Weldable 1/4" thick housing!
Single poly bushing with 2.5" or 3" overall mounting width and 1.50" minor diameter 1.75" major diameter and 2.0" OD Heavy Dut...
Skull logo sticker. Available in white, black and red. Sizes available include 2.5" x 3", 3 x 3.5", 4"x 5", 23" x 26". Other sizes available upon request. Must call for custom sizes. Largest size ...
Ballistic Slider
For 2.125 OD Coilovers
Slider for 2.125" OD Coil over shocks. For use with dual rate and triple rate coil over shock configurations. Machined from Nylatron.
What's Included...
Small Gusset
Gusset laser cut from 1/8", 3/16" or 1/4" plate measuring 1.5" x 1.5". Great for reinforcing shock tabs, roll cages and link brackets!
What's Included
Pair (2) Gusset
INSTALL...
Small Trick Tab 5-Pack
The Perfect Little Mount
Small trick tabs come in a 5-pack. Great for mounting smaller lights and body panels. Made from 1/8" steel and CNC Press formed. .344" cente...
Hardened Chromoly Spanner Tool for Ballistic Joints, Forged Rod End and Ballistic Uniball
Easily Adjust the Pre-load of Your 2.0", 2.63" & 3.0" Ballistic Joints and Forged Rod end / Uniball
...
Standard Spacer
Weldable Design
These spacers are designed to be used with 3/4" and 7/8" rod ends and high misalignment spacers to allow usage with popular 2.63" wide link brackets. Made ...
This Kit Includes:
4 3/4"-16 CrMo high strength rod ends
4 Tube adapters for rod-ends machined from 1020 DOM steel
One 1.5"OD .250" wall tube for drag-link 43" long
One 1.5" OD.250" ...
4 3/4"-16 CrMo high strength rod ends
4 Tube adapters for rod-ends machined from 1020 DOM steel
One 1.5"OD .250" wall tube for drag-link 43" long
One 1.5" OD.250" wall tube for tie-ro...
Steering Kit 7/8" with High Misalignment Spacers
Strengthen Your Steering
Whats Included
4 7/8"-14 CrMo high strength rod ends
4 Tube adapters for rod-ends machined from 1018 CRS steel
One 1.5"...
Step Down Spacer
3/4" to 5/8" With 1/16" Shoulder
Step down spacers make crossover steering conversions with larger rod ends very easy and safe. The spacers reduce the bore to accomodate a pr...
Step Down Spacer
5/8" to 1/2" With 1/8" Shoulder
Step down spacers make crossover steering conversions with larger rod ends very easy and safe. The spacers reduce the bore to accommodate a pra...
Step Down Spacer
7/8" to 3/4" With 1/16" Shoulder
Step down spacers make crossover steering conversions with larger rod ends very easy and safe. The spacers reduce the bore to accommodate a p...
100% Machined In the U.S.
Using Domestic and Imported Materials
4140 Hardened Chromoly Housing and Spanner Nut
Hardened 416 Stainless Steel Ball
Polyurethane Races manufactured by Prothane
Adj...
Lower Axle Link Brackets
CNC Laser Cut and Press Formed
4 link or 3 link lower link axle mount kits: Includes 2 link bracket kits to complete one axle. Plates 'self-jig' and are designed for ease...
Single Poly Bushing with DOM Sleeve
Weldable 1/4" thick housing!
Single poly bushing with 2.5" or 3" overall mounting width and 1.50" minor diameter 1.75" major diameter and 2.0" OD Heavy Dut...
Axle tube Shock bracket
Strong mounts In a simple design
Coil Over / Shock mount boxed design. Cut from 3/16" plate for a .5" boltMounting width for shock is 1.50" and Coped for 3.0" axle tube b...
High Clearance Shock Tabs
When Space Is Limited
High Clearance Shock Tabs. For use with shocks, coilovers, and air shocks. Made from .250" steel with a 1/2" bolt diameter. Available for moun...
