Collection:
Cage Accessories
27 products
OD Tube Clamp
O.D. Tube Clamp
Precise Fit and Stout Design
OD Tube clamps can be used to attach a part to the outer diameter of a tube by clamping force. This allows removal and adjustability in steering l...
I.D. Tube Clamp
I.D. Tube Clamp
Precise Fit and Stout Design
Weld in Inner Diameter Tube Clamps. CNC turned and CNC milled for a precise fit. Ideal for roll cages, engine bridges and other tube sections that...
Tube Clevis End
Tube Clevis End
Create A Custom, Heavy Duty Anchor Point
Create an anchor point at the front or rear of your tube chassis or bumper. Best suited when large surfaces are not available to attach...
Heavy Duty Clevis / D-ring Tab
Heavy Duty Clevis / D-Ring Tab
For The Ultimate Recovery Point
Heavy Duty Clevis / D-Ring Tabs are perfect for a 7/8" shackle or D-ring. CNC milled from solid 1" 1018 cold rolled steel, the...
Through Bumper Clevis Mount
Through Bumper Clevis Mount
Secure Recovery Point
If you are adding recovery points to an existing bumper or building a new one, the Ballistic Through Bumper Cleivs Mount is the perfect op...
Billet Steel Tube Caps
Billet Steel Tube Caps
Add A Custom Look To Your Project
Billet tube ends machined from 1020 cold rolled steel. Use to cap open tubes on bumpers, sliders, racks or any variety of other applic...
Billet Steel Tube Spikes
Billet Steel Tube Spikes
Add A Custom Look To Your Project
Billet tube SPIKES machined from 1020 cold rolled steel. Use to cap open tubes on bumpers, sliders, racks or any variety of other ...
OD Tube Clamp w/ Mounting Tab
Tube Clamp With Mounting Tab
Mount Accessories or Lines Securely To Your Tubing
Safe, secure mounting option for tube chassis and roll cages. OD Tube Clamp w/ Mounting Tab. Perfect for mountin...
Trick Tab
Trick Tab
The Perfect Little Mount
Choose from 1 hole trick tab or 3 hole trick tab. Made from 1/8" steel and CNC Press formed. 3/8" center hole. 1/4" side holes on 3 hole tab. Includes ONE...
Small Trick Tabs (5-pack)
Small Trick Tab 5-Pack
The Perfect Little Mount
Small trick tabs come in a 5-pack. Great for mounting smaller lights and body panels. Made from 1/8" steel and CNC Press formed. .344" cente...
6 x 5.5 in Spare Tire Mounting Plate
6 x 5.5" Spare Tire Mounting Point
Heavy Duty Mounting For Your Spare
6x5.5" Spare Tire Mounting Plate. Includes three loose 12x1.5" studs. Studs DO NOT come pre-installed. Made from 3/8" steel...
Multi-Pattern 8 Lug Spare Tire Mounting Plate
8-Lug Spare Tire Mounting Point
Multiple Bolt Patterns In One Simple Design
Multi-Pattern 8 Lug Spare Tire Mounting Plate. Includes mounting holes for 8 x 6.5" and 8 x 170mm lug patterns. Incl...
Multi-Pattern 5 Lug Spare Tire Mounting Plate
5-Lug Spare Tire Mounting Point
Multiple Bolt Patterns In One Simple Design
Multi-Pattern 5 Lug Spare Tire Mounting Plate. Includes mounting holes for 5 x 4.5", 5 x 5" and 5 x 5.5" lug pattern...
Small Gussets
Small Gusset
Gusset laser cut from 1/8", 3/16" or 1/4" plate measuring 1.5" x 1.5". Great for reinforcing shock tabs, roll cages and link brackets!
What's Included
Pair (2) Gusset
INSTALL...
Cage Gusset
Cage Gusset
Laser Cut!
Add strength and safety to your cage. All gussets cut from 3/16" plate measuring 3.5" x 3.5". Choose from 80, 90, or 100 degree gussets. Availabe in single gussest fo...
90 Degree Gusset With Skull Cut-Out
Cage Gusset With Skull Cut Out
90 Degree Gusset
Add strength and safety to you cage with a Ballistic Skull gusset CNC laser cut from 3/16" plate measuring 4" by 4".
What's Included
One ...
Cage Gusset With Holes
Cage Gusset With Holes
Laser Cut!
Add strength and safety to your cage. All gussets cut from 3/16" plate measuring 4" x 4". Choose from 80, 90, or 100 degree gussets. Price per gusset.
Wha...
Generic Winch Plate
Ballistic Generic Winch Plate
Fits Most Warn Winches
A winch is one of the most valuable off road, farm, and work accesories. Add a safe, stable mounting platform to your truck, Jeep, or buggy...
20% Off
HD Tie Down Tabs
HD Tie Down Tabs
For Safe, Secure Loads
HD Tie Down Tabs. Sold as a pair. Great recovery point for straps and chains. CNC laser cut from 3/8" steel. Hole is 1.5" in diameter. Available for 2....
Tube Flange 2-Bolt Design
Tube Flange 2-Bolt Design
Weld-on Tube Flange cut from 3/16" plate. Holes are laser cut to 3/8".
What's Included
Two(2) Tube Flanges
INSTALLATION INSTRUCTIONS HERE
Tube Flange 4 Bolt Design
Tube Flange 4 Bolt Design
Weld-on tube flange 4 bolt design. Cut from 3/16" A50 plate. Includes 2 pieces. Holes laser cut to 3/8".
What's Included
Two(2) Tube Flanges
INSTALLATION INSTRUC...
Jam Nut
Jam Nut
Zinc coated Jam nut. Use these with all suspension joints to lock threads in place. Price per Jam nut.
What's Included
One (1) Jam Nut
Forged Chromoly 2.63 in Ballistic Joint
100% Machined In the U.S.
Using Domestic and Imported Materials
4140 Hardened Chromoly Housing and Spanner Nut
Hardened 416 Stainless Steel Ball
Polyurethane Races manufactured by Prothane
Adj...
1.25 in -12 tpi Tube Adapter
Tube Adapter
1.25" -12 tpi
1020 CRS Tube adapter 1.25" -12tpi
What's Included
One (1) Tube Adapter
INSTALLATION INSTRUCTIONS HERE
7/8 in -14 tpi Tube Adapter
Tube Adapter
7/8" -14 tpi
1020 CRS Tube adapter 7/8" -14tpi
Size 1: A: 1.0 in, B: 7/8 in 14 tpi, C: 1.25 in, D: 1.7 in, E: 7/8 in Size 2: A: 1.0 in, B: 7/8 in 14 tpi, C: 1.5 in, D: 1.75 ...
3/4 in -16 tpi Tube Adapter
Tube Adapter
3/4" -16 tpi
1020 CRS Tube adapter 3/4" -16tpi
Size 1: A: 1.0 in , B: 3/4 in 16 tpi, C: 1.25 in, D: 1.75 in, E: 7/8 in
Size 2: A: 1.0 in , B: 3/4 in 16 tpi, C: 1.5 in, D: 1....
Lower Axle Link Bracket (Pair)
Lower Axle Link Brackets
CNC Laser Cut and Press Formed
4 link or 3 link lower link axle mount kits: Includes 2 link bracket kits to complete one axle. Plates 'self-jig' and are designed for ease...
Single Poly Bushing with DOM Sleeve
Single Poly Bushing with DOM Sleeve
Weldable 1/4" thick housing!
Single poly bushing with 2.5" or 3" overall mounting width and 1.50" minor diameter 1.75" major diameter and 2.0" OD Heavy Dut...
Axle tube shock bracket (Pair)
Axle tube Shock bracket
Strong mounts In a simple design
Coil Over / Shock mount boxed design. Cut from 3/16" plate for a .5" boltMounting width for shock is 1.50" and Coped for 3.0" axle tube b...
1.0 in -14 tpi Tube Adapter
Tube Adapter
1.0" -14 tpi
1026 Cold Rolled Steel Tube adapter 1.0" -14tpi
What's Included
One (1) Tube Adapter
INSTALLATION INSTRUCTIONS HERE
High Clearance Shock Tabs
High Clearance Shock Tabs
When Space Is Limited
High Clearance Shock Tabs. For use with shocks, coilovers, and air shocks. Made from .250" steel with a 1/2" bolt diameter. Available for moun...
Use left/right arrows to navigate the slideshow or swipe left/right if using a mobile device