GM 14 Bolt 9.5" Semi Float Differential Cover
Welded 3/8" Steel
9.5" 14 Bolt Semi Float Differential Cover made from 3/8" steel. CNC Laser cut and CNC Press formed from one piece. The ultra thick 3/8" flange resists pulling off of the sealing surface while dragging the differential while the 3/8" body resists denting even during the most abusive circumstances. Includes weld on skull logo. Welded and Machined flat for a great fit.
Please Note: GM H2 Hummer vehicles require at least 4" lift, raised axle trac bar bracket and/or aftermarket trac bar needed to clear the diff cover. Included hardware lis M8-1.25 x 25mm - there are multiple variations to this differential, and Ballistic Fabrication is NOT responsible for replacing hardware if it varies from advertised specifications below. We recommend that you remove a bolt from the top of your differential cover and verify compatibility with our provided hardware. We can accommodate hardware swaps if requested before shipment of the cover.Note: GM used as many as 4 different bolt sizes on these axles.
Great Value Even Better Protection!
What's Included
- One (1) Differential Cover 3/8" Steel Plate
- Fourteen (14) SHCS: M8-1.25 x 25mm Zinc Plated Grade 8 bolts
- One (1) Zinc plated fill plug