Ford Super Duty 05' to 12.5' D60 High Steer Kit for Reid Knuckles

HSA-801 3 In stock
  • Sale
  • Regular price $876.99


Ford Super Duty 05' to 12.5' D60 High Steer Kit for Reid Knuckles
Better Design, Better Clearance

 

Most modern solid axle equipped trucks and Jeeps are equipped with crossover steering. If you have a lifted Jeep or truck, or do any off-roading, you should strongly consider adding a Ballistic Fabrication high steer kit to your vehicle.  When you lift a solid axle vehicle the alignment of the crossover steering components change, sometimes to drastic angles depending upon the amount of lift added. When the axle flexes to it's limits steering components like ball joints and tie rod ends can fail due to the extreme angles. Measurement from the center of the kingpin to the holes of the arms for the steering heim is 8 1/4 and from the double sheer bolt it is 6 7/8  (HSA-801).

By adding a Ballistic Fabrication Ford Super Duty 05' to 12.5' D60 High Steer Kit for Reid Knuckles to axle, this will move your steering components up and bring the crossover steering system closer to factory alignment.  In addition, by moving the steering components up you will gain much needed clearance that moves the steering out of the way of obstacles on the trail.

Ballistic's Ford Super Duty 05' to 12.5' D60 High Steer Kit for Reid Knuckles are fully CNC machined and offer 3/4" thru hole for heim joints. 

Order today to eliminate potential steering problems or failures with your Ford Super Duty 05' to 12.5' D60 High Steer Kit for Reid Knuckles equipped truck or jeep!


What's Included
The Ballistic Full Ford Super Duty 05' to 12.5' D60 High Steer Kit for Reid Knuckles high steer kit comes with the following:
  • Two (2) CNC Machined High Steer arms
  • Ten (10) Studs and Nuts
  • Four (4) 7/8" Heim joints
  • Four (4) 7/8" Jam Nuts
  • Four (4) 7/8"-14 Tube Adapters
  • Six (6) High Misalignment Spacers
  • Three (3) 3/4" Grade 8 Hex Bolts

Customer Reviews

Based on 1 review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
100%
(1)
S
Shawn D. (Alcester, US)
Parts dont fit, and you claim they will fit the 12.5 knuckle

Steering arms didn't fit, and they claim they had no idea they didn't fit the 12.5 knuckle and they offered nothing other than a blue print of the bolt pattern for the reid knuckles i spent 3 hrs in my mill correcting them on my own.