Two (2) Retainers
I like the bracket, but the problem is there’s no way to center the coil spring I ended up having to find a piece of tubing and weld to it
These things are heavy duty and cut just right! They're going to make my conversion much easier.
Heavy made spring mounts but factory mount are offset to keep spring away from the tire . Yours are centered with frame leaving little clearance between rear tire and spring.
I bought these for the back of my tj. I didn't use the retainer that they sent along. I opted to built a centering pin out of d.o.m. tube and incorporate my bump stop into that.
The fitment was nice and clean. Bought lots of ballistic link mounts and bracketry and been happy with everything I received.
Solid, heavy, beefy! Just what you want out of a coil spring perch. Installed these at the same time as repairing the frame on my TJ. Welded up nicely with a fluxcore and are solid. Only downside, if there is one, having a hard time coming up with a bumpstops solution.