1.0 in -14 tpi Tube Adapter - Tube Adapter - Ballistic Fabrication
1.0 in -14 tpi Tube Adapter - Tube Adapter - Ballistic Fabrication
1.0 in -14 tpi Tube Adapter - Tube Adapter - Ballistic Fabrication
1.0 in -14 tpi Tube Adapter - Tube Adapter - Ballistic Fabrication
1.0 in -14 tpi Tube Adapter - Tube Adapter - Ballistic Fabrication
1.0 in -14 tpi Tube Adapter
1.0 in -14 tpi Tube Adapter
1.0 in -14 tpi Tube Adapter
1.0 in -14 tpi Tube Adapter
1.0 in -14 tpi Tube Adapter - Tube Adapter - Ballistic Fabrication
1.0 in -14 tpi Tube Adapter - Tube Adapter - Ballistic Fabrication
1.0 in -14 tpi Tube Adapter - Tube Adapter - Ballistic Fabrication
1.0 in -14 tpi Tube Adapter - Tube Adapter - Ballistic Fabrication
1.0 in -14 tpi Tube Adapter - Tube Adapter - Ballistic Fabrication
1.0 in -14 tpi Tube Adapter
1.0 in -14 tpi Tube Adapter
1.0 in -14 tpi Tube Adapter
1.0 in -14 tpi Tube Adapter

1.0 in -14 tpi Tube Adapter

TA-239 16 In stock
  • Sale
  • $12.99

 

 

Tube Adapter
1.0" -14 tpi
 

1026 Cold Rolled Steel Tube adapter 1.0" -14tpi

 

What's Included
One (1) Tube Adapter

    INSTALLATION INSTRUCTIONS HERE 

    Customer Reviews

    Based on 18 reviews
    94%
    (17)
    0%
    (0)
    6%
    (1)
    0%
    (0)
    0%
    (0)
    S
    Stu C. (Broken Arrow, US)
    Control Arm rebuild

    Perfect part. great customer service

    Thank you for the great review Stu, it's always great to hear when our customers are happy with their order and the service they received. Have a great day :)

    E
    Ethan E. (Locust, US)
    Awesome!

    Works great! Having adjustment is what I needed!

    S
    Stan H. (Calgary, CA)
    Still pending

    I haven't used them yet
    I have been working on other projects
    Once I received them my first thoughts were they look good

    N
    Nick G. (Alamo, US)
    Awesome treatment

    Great service. Lost parts in transit and sent another order right away. Parts fit perfect.

    R
    Roger C. (Springfield, US)
    Perfect

    Had to shorten my rear link arms so ordered new adapters. Not sure where my error occurred but my link arms were 1.25 inches too long and could only adjust to the required length by bottoming out the rod ends in the link arms. I hadn't checked them till I went to configure my rear axle. Lesson learned. Length is good now with sufficient adjustment available. The adapters shipped out quickly and I was able to correct my issue fairly quickly as a result.

    123