Dana 44 Inner Knuckle Gusset Set
Beef Up Your Dana44!
Add extra strength to the weakest part. Ensure a tough, reliable axle for many miles. Gusset set for reinforcing Dana 44 knuckle's (inne...
Step Down Spacer
3/4" to 5/8" With 1/16" Shoulder
Step down spacers make crossover steering conversions with larger rod ends very easy and safe. The spacers reduce the bore to accomodate a pr...
Inner Frame Mount
CNC Laser Cut and Press Formed
Inner frame mount available pre-set at 22.5 degrees for an overall 45 degrees of separation. Welds to inner frame rail and eliminates the need t...
6 x 5.5" Spare Tire Mounting Point
Heavy Duty Mounting For Your Spare
6x5.5" Spare Tire Mounting Plate. Includes three loose 12x1.5" studs. Studs DO NOT come pre-installed. Made from 3/8" steel...
Ballistic Fabrication Poly Bushing
BUSHINGS DESIGNED AND PRODUCED BY PROTHANE
The 2.63" Ballistic Poly Bushing with weldable housing is made to be the ultimate in durability and ease of use. ...
2.375" Ballistic Joint
The Only Joint on the Market with a Lifetime Warranty*
100% Machined In the U.S.
(Using Domestic and Imported Materials)
All Ballistic Joints ship Fully Assembled!
The...
Strongest Joint On The Market!
The 2.63" Heavy Duty Ballistic Joint is manufactured to be the ultimate in durability and ease of use. Offers 30 degrees total misalignment with a 9/16" bal...
Dana 44 Coilover / Shock Mounts / Gussets
Coil Over or Shock mount / gussets for the Dana 44 knuckle made from 1/4" steel (4 pieces): The gussets distribute force exerted by the coil over’s ...
Tapered GM TRE insert for 3/4 and 1 ton Tie Rods Ends. This tapered insert allows you to convert under the knuckle steering on most 3/4 and 1 ton axles to over the knuckle. Overall length is 1.2...
4-Link Adjustable Ballistic Joint Mounting System
CNC Laser Cut and Press Formed
ALSO AVAILABLE FOR MOUNTING TO 2 SQUARE TUBE.
4 link triangulated upper for 1.750" tubing, adjustable from ...
Heavy Duty 45 Degree Tabs
Mount Links or Shocks
Heavy Duty tabs for mounting at 45 degrees off of square tubing. Great for mounting links or shocks. Laser cut in-house with a 1/2" bolt ho...
Flat Bottom Radius Arm and Coil Mounts
Higher Clearance For Custom Suspension
Radius arm / coil mount with retainer - Allows a flat bottom for higher clearance under axle. Cut from 1/4" plat...
Adjustable Inner Frame Bracket / Lower Frame
CNC Laser Cut and Press Formed
Inner frame bracket gives 2.63" mounting width with 2 inches of adjustment. Set at a 22.5 degree angle or at 0 de...
Ballistic Skull Hitch Cover
Protect Your Hitch With Style
Ballistic Fabrication skull trailer hitch cover keeps dirt and mud out of your receiver in style. Measuring 4 inches tall by 3.5 inch...
Large Link Tabs
CNC Laser Cut
Large link tabs with FLAT bottom. Bolt hole diameter 9/16". Provides enough clearance for use with 2.63" and 3.0" Ballistic Joints. Includes two pieces (one brac...
Jeep JK Rubicon Dana 44 Differential Cover
Now includes Integrated Magnetic Drain Plug
Welded 3/8" and 1/4" Steel
Need a bullet proof diff cover for your Jeep Rubicon Dana 44 axle? Look no...
Dana 60 King Pin - Coil Over / Shock Mount And Gusset
Beef Up Your Dana60
Coil Over or Shock mounts / knuckle gussets for a kingpin Dana 60. Choose the option for Chevy or Ford axles. Cut f...
100% Machined In the U.S.
Using Domestic and Imported Materials
4140 Hardened Chromoly Housing and Spanner Nut
Hardened 416 Stainless Steel Ball
Polyurethane Races manufactured by Prothane
Adj...
Lower Axle Link Brackets
CNC Laser Cut and Press Formed
4 link or 3 link lower link axle mount kits: Includes 2 link bracket kits to complete one axle. Plates 'self-jig' and are designed for ease...
Axle tube Shock bracket
Strong mounts In a simple design
Coil Over / Shock mount boxed design. Cut from 3/16" plate for a .5" boltMounting width for shock is 1.50" and Coped for 3.0" axle tube b...
Single Poly Bushing with DOM Sleeve
Weldable 1/4" thick housing!
Single poly bushing with 2.5" or 3" overall mounting width and 1.50" minor diameter 1.75" major diameter and 2.0" OD Heavy Dut...
High Clearance Shock Tabs
When Space Is Limited
High Clearance Shock Tabs. For use with shocks, coilovers, and air shocks. Made from .250" steel with a 1/2" bolt diameter. Available for moun...
