Collection:
ALL PRODUCTS
388 products
D60002FL / D60002FR Ford SUPERDUTY High Steer Knuckle (2005 - 2012-1/2)
Reid Racing Ford SUPERDUTY High Steer Knuckle (2005 - 2012-1/2)
Uses OEM 2005 - 2012½ SuperDuty ball joints, unit bearing, caliper, rotor, lockout hub, stub shaft, and U-joint. Ford changed t...
Dana 60 Shave "Replacement Cover Only"
Dana 60 Shave Kit
Gain 1" of ground clearance!
Includes a differential cover CNC laser cut and CNC Press formed from 3/8" steel plate and 5/8" thick billet bottom block, with a 1/2" thick bottom...
1" in x 3.0" w/ No Neck Down BALL for 3.0 in Ballistic Joint - Hardened 416 Stainless Steel
1" in x 3.0" w/ No Neck Down BALL for 3.0 in Ballistic Joint - Hardened 416 Stainless Steel
1" in x 3.0" w/ Neck Down BALL for 3.0 in Ballistic Joint - Hardened 416 Stainless Steel
1" in x 3.0" w/ Neck Down BALL for 3.0 in Ballistic Joint - Hardened 416 Stainless Steel
7/8 in BALL for 3.0 in Ballistic Joint - Hardened 416 Stainless Steel
7/8" BALL for 3.0" Ballistic Joint made from Hardened 416 Stainless Steel
Pre-Machined Gear for 2010 & down Ford Sterling Rear 10.5" / 10.25" Thick Cut Shave Kit
Pre-turned Gear Ring & Pinion. For use with our 2010 & down Ford Sterling 10.5" / 10.25" Shave Kit. These gears have been machined to 10.000" and are ready to install!
C Ring For Uni 930
2 1/8 Internal Retaining Ring
Internal Retaining Ring for 2-1/8" ID for Uniball Bearing 2.125 IN OD With 1.0" Bore . Part Number Uni-930. Black Phosphate 106...
1/4" Magnetic Diff Drain Plug
Replacement 1/4"-18 magnetic tapered NPT diff drain plug for all Ballistic Fab diff covers that have a available drain port.
Ballistic Uniball
BALLISTIC UNIBALL/ DISCONTINUED ITEM
Chromoly heat treated, clear zinc plated spanner nut
4130 Billet Chromoly housing
Obsolete revision with wider housing available on our website Ballisticfabric...
LEGACY SPANNER NUT for 2.63 in Ballistic Joint - 24 TPI 2015 and below
Hardened 4140 Chromoly SPANNER NUT for 2.63" Ballistic Joint - Zinc Plated
2.3" x 24 TPI (2015 and below)
Jeep JK/JL Inner Knuckle Gusset Set (Inner C's)
07+ Jeep JK/JL Dana 30 / 44 Inner Knuckle Gusset Set
Beef Up Your Dana44!
Add extra strength to the weakest part. Ensure a tough, reliable axle for many miles. Gusset set for reinforcing Da...
SuperDuty Shave Kit 99-08' Hardened Bolt Protector
Replacement Hardened Bolt Protector for kit -
DIF-2002-6
DIF-2002-7
THIS IS THE BOLT PROTECTOR ONLY, Does not include diff cover, bottom plate or hardware
Sterling 10.5" / 10.25" Shave Kit with Hardened Bolt Protector - Replacement Cover Only
Sterling 10.5" / 10.25" Shave Kit
With 4140 Hardened Bolt Protector
Welded 3/8" and 1/4" Steel
It's finally here, the ultimate Sterling 10.5" axle upgrade. Kit has been tested, perfected and i...
14 Bolt Shave Kit - Replacement Cover Only
Replacement Shave Kit replacement cover for kits -
DIF-2001-05M
DIF-2001-05S
DIF-2001-06S
DIF-2001-06M
THIS IS THE COVER ONLY, Does not include bottom plate.
Ballistic Bushing - 2.63 Nylatron Bushing Kit
Ballistic Bushing Upgrade Kit
For Use With Forged and Weldable Ballistic Bushings
Nylatron GSM bushings are harder than the red polyurethane that we normally supply with our 2.63 Ballistic Bush...
Adjustable upper 4 link mounting system REV 1 - Digital Download
DIGITAL DOWNLOAD
Upper link mounting system that allows the use of a 1.25" rod end, 2.63" Ballistic joint or a 3.0" Ballistic joint with various mounting options. Designed to be cut from .250 mild...
Ultimate Dana 60 Differential Cover
ULTIMATE Dana 60 Differential Cover
Welded and Machined 3/8" Steel
The Ultimate Dana 60 Differential Cover made from 3/8" steel flange and a 1/4" body. CNC Laser cut and CNC Press formed 1...
Sold Out
TrackBar / Panhard Bar Options - Complete Kit
TrackBar / Panhard Bar Options - Complete Kit may be used on almost any vehicle equipped or in need of a TrackBar / Panhard Bar. Complete kit includes all brackets, tubing, adapters, joints and har...
416 Hardened Stainless Steel Spacer 3/4 in.
416 Hardened Stainless Steel Spacer 3/4 in.
Get The Clearance You Need
Spacer width is 7/16". Total mounting width with a rod end is 1.75". Sold individually.
What's Included
One (1) S...
HARDENED 416 SS Safety Washer
Safety Washer
HARDENED 416 SS Safety Washer
Safety Washers are constructed from 416 Stainless Steel. While leaving room for deflection in the joint, these are designed to prevent the ball fr...
Sold Out
OFFSET ES2234L Chevy Tie Rod End 7/8 18 tpi
OFFSET ES2234L. Jam nut sold separately.
Use to offset your steering linkages forward a full inch for additional clearance from brackets or aftermarket differential covers. Maximum angle for the ...
Jam Nut
Jam Nut
Zinc coated Jam nut. Use these with all suspension joints to lock threads in place. Price per Jam nut.
What's Included
One (1) Jam Nut
Forged Chromoly 2.63 in Ballistic Joint
100% Machined In the U.S.
Using Domestic and Imported Materials
4140 Hardened Chromoly Housing and Spanner Nut
Hardened 416 Stainless Steel Ball
Polyurethane Races manufactured by Prothane
Adj...
7/8 in -14 tpi Tube Adapter
Tube Adapter
7/8" -14 tpi
1020 CRS Tube adapter 7/8" -14tpi
Size 1: A: 1.0 in, B: 7/8 in 14 tpi, C: 1.25 in, D: 1.7 in, E: 7/8 in Size 2: A: 1.0 in, B: 7/8 in 14 tpi, C: 1.5 in, D: 1.75 ...
1.25 in -12 tpi Tube Adapter
Tube Adapter
1.25" -12 tpi
1020 CRS Tube adapter 1.25" -12tpi
What's Included
One (1) Tube Adapter
INSTALLATION INSTRUCTIONS HERE
3/4 in -16 tpi Tube Adapter
Tube Adapter
3/4" -16 tpi
1020 CRS Tube adapter 3/4" -16tpi
Size 1: A: 1.0 in , B: 3/4 in 16 tpi, C: 1.25 in, D: 1.75 in, E: 7/8 in
Size 2: A: 1.0 in , B: 3/4 in 16 tpi, C: 1.5 in, D: 1....
Lower Axle Link Bracket (Pair)
Lower Axle Link Brackets
CNC Laser Cut and Press Formed
4 link or 3 link lower link axle mount kits: Includes 2 link bracket kits to complete one axle. Plates 'self-jig' and are designed for ease...
Axle tube shock bracket (Pair)
Axle tube Shock bracket
Strong mounts In a simple design
Coil Over / Shock mount boxed design. Cut from 3/16" plate for a .5" boltMounting width for shock is 1.50" and Coped for 3.0" axle tube b...
1.0 in -14 tpi Tube Adapter
Tube Adapter
1.0" -14 tpi
1026 Cold Rolled Steel Tube adapter 1.0" -14tpi
What's Included
One (1) Tube Adapter
INSTALLATION INSTRUCTIONS HERE
Single Poly Bushing with DOM Sleeve
Single Poly Bushing with DOM Sleeve
Weldable 1/4" thick housing!
Single poly bushing with 2.5" or 3" overall mounting width and 1.50" minor diameter 1.75" major diameter and 2.0" OD Heavy Dut...
Heavy Duty Frame Link Mount (Single)
Heavy Duty Frame Link Mount
Low Impact Profile
Frame bracket designed to be welded to the bottom of the frame rail. Self-jigging design spaced 2.63" inside for use with 2.63" Ballistic joi...
Use left/right arrows to navigate the slideshow or swipe left/right if using a mobile device