Corporate 14 Bolt Rear Axle Truss - For Leaf Springs - 38.25" Overall Width
The Ultimate 14 Bolt Truss System
This truss system is designed for 4-link capability on a rear 14 Bolt axles. It ser...
Looking to design a custom Y-Link steering setup? Use this adapter in-between two pieces of 1.5" x .250" wall DOM tubing to create a mounting point for the secondary tie rod. Made from 1018 Cold Ro...
Don't want to spend the time and effort weakining your SD60 differential by cutting off the short side tube casting? We have the perfect solution for you! Laser cut from 1/4" steel and gusseted, th...
Introducing our NEW Low Profile Ford Super Duty 2005+ (Coil Sprung) Dana 60 Front Truss for a sleeker high clearance design to fit with many add on options! Add a diff cover, shave kit or double e...
'99-'23 Ford Super Duty Dana 60 Shave "Replacement Cover" Only
Gain 1.25" of ground clearance!
Includes a differential cover CNC laser cut and CNC Press formed from 3/8" steel plate. Comes with...
416 Hardened Stainless Rod End Spacers
Options include: 1/2 in, 5/8 in,
3/4 in, 7/8 in and 1" in.
Get The Clearance You Need
Spacer width is 7/16". Total mounting width with a rod end is 1....
Pre-turned Gear Ring & Pinion. For use with our AAM 11.5 Shave Kit. These gears have been machined to 11.000" and are ready to use with our AAM 11.5 shave kits!
'05-'16 Ford Super Duty Dana 60 Differentials
Gain 1.25" of ground clearance!
The Core differential; includes near complete factory assembly and ready to be rebuilt.
The Diff Cover different...
Ford Superduty Dana M275/M300 10.8"/11.8" Rear Differential Cover for 2017+ Ford F350
The Dana M275/M300 10.8"/11.8" Differential Cover is made for the 2017+ Ford F350 Super Duty rear axle and...
Replacement Hardened Bolt Protector for kit -
DIF-2001-19
DIF-2001-20
DIF-2001-21
DIF-2001-22
THIS IS THE BOLT PROTECTOR ONLY, Does not include diff cover, bottom plate or hardware
Reid Racing Heavy Duty Dana 60 Kingpin Knuckles
The strongest Dana 60 knuckles on the market
Cast from high strength ductile iron
Beefed up with extra material and ribbing
100% interchangeable w...
Toyota FJ80 Rear Axle Truss
Link Mounts and Truss Combo
Fits 94-97 Rear Axle Truss with Toyota FJ80 axle. Laser cut from 3/16" steel and faetures an oversized upper link mount surface. Includes...
2.00" Thick Wheel Spacers
100% MADE IN THE USA
USING METRIC WHEEL STUDS
Wheel Spacers for 8 x 6.5" wheels requiring Metric M14-1.5 Wheel Studs. Sold as a pair. Spacer is 2.00" thick. T...
1.50" Thick Wheel Pattern Adapters
Run Ford 8 x 170 wheels on your '88 and older "4 rib" 14 bolt and the '89 and Later "16 rib" Metric GM 14 bolt rear axle and make it equal width to the 05'-08' ...
14 Bolt BUMP FORM MRK 3.3 Shave Kit
Greater Protection To Prevent Prone Rock Damage
Gain an additional 2 inches of ground clearance over stock with this kit. Bottom bolts are protected by the ...
Replacement "MRK 3 Shave Cover only" for kits -
DIF-2001-05M
DIF-2001-05S
DIF-2001-06S
DIF-2001-06M
THIS IS THE COVER ONLY, Does not include bottom plate or hardware
GM AAM 9.5, 9.76 12 Bolt Rear Differential Cover
Welded 3/8" and 1/4" Steel
Ballistic Fabrication designed this rear differential cover for 2014 to 2019 Chevy Silverado and GMC Sierra 1500 t...
100% Machined In the U.S.
Using Domestic and Imported Materials
4140 Hardened Chromoly Housing and Spanner Nut
Hardened 416 Stainless Steel Ball
Polyurethane Races manufactured by Prothane
Adj...
Lower Axle Link Brackets
CNC Laser Cut and Press Formed
4 link or 3 link lower link axle mount kits: Includes 2 link bracket kits to complete one axle. Plates 'self-jig' and are designed for ease...
Single Poly Bushing with DOM Sleeve
Weldable 1/4" thick housing!
Single poly bushing with 2.5" or 3" overall mounting width and 1.50" minor diameter 1.75" major diameter and 2.0" OD Heavy Dut...
Axle tube Shock bracket
Strong mounts In a simple design
Coil Over / Shock mount boxed design. Cut from 3/16" plate for a .5" boltMounting width for shock is 1.50" and Coped for 3.0" axle tube b...
High Clearance Shock Tabs
When Space Is Limited
High Clearance Shock Tabs. For use with shocks, coilovers, and air shocks. Made from .250" steel with a 1/2" bolt diameter. Available for moun...
