| This Kit Includes:
Y-link kit: 4 7/8"-18 Chevy tie rod ends
(x1 es2033L, x1 es2027L, x2 es2234R)
or
Crossover kit: 4 7/8"-18 Chevy tie rod ends
(x1 es2234L, x1 es2027L, x2 es2234R)
plus
-
4 Tube adapters for rod-ends machined from 1020 DOM steel
-
Two 1.5"OD .250 wall tubes for tie rod and drag-link 58" long
-
4 Jam nuts (two left hand and two right hand thread)
Note: the es2027L is a drag link end and has a different taper than the other Tie Rod ends. It is intended for mounting on a pitman arm but will require further reaming of any stock pitman arm to fit. The reamer used for the standard TRE's (1.5 inches/foot) will work to ream out the pitman arm but will require a deeper reaming.
Ballistic Fabrication is not responsible for inaccurate measurements on the part of the customer and corrections made to the linkages will be subject to additional charges including shipping. |
