| This Kit Includes: -
4 3/4"-16 CrMo high strength rod ends -
4 Tube adapters for rod-ends machined from 1020 DOM steel One 1.5"OD .250" wall tube for drag-link 50" long - One 1.5" OD.250" wall tube for tie-rod 58" long
-
4 Jam nuts -
4 high-misalignment spacers for drag link -
4 step-down spacers for tie rod -
4 Safety Washers (used for single sheer rod end applications) NOTE: The spacers in this kit downsize the rod end bore to 5/8" which means you will use a 5/8" bolt. If you need to use a larger bolt and need high misalignment, you should get the 7/8" steering kit. Shipped via UPS Ground ONLY
Ballistic Fabrication is not responsible for inaccurate measurements on the part of the customer and corrections made to the linkages will be subject to additional charges including shipping. |
