|
This Kit Includes:
-
4 3/4"-16 CrMo high strength rod ends
-
4 Tube adapters for rod-ends machined from 1020 DOM steel
-
Two 1.5"OD .250 wall tubes for tie rod and drag-link up to 58" long
-
4 Jam nuts
-
4 high-misalignment spacers for drag link
-
4 step-down spacers for tie rod
-
4 Safety Washers (used for single sheer rod end applications)
-
TIG welding available
NOTE: The spacers in this kit downsize the rod end bore to 5/8" which means you will use a 5/8" bolt. If you need to use a larger bolt and need high misalignment, you should get the 7/8" steering kit.
All tie rod and drag link lengths are to be measured eye-to-eye. If you are unsure of this length please select 'No welding' and you will receive 58" long tubes. Ballistic Fabrication is not responsible for inaccurate measurements on the part of the customer and corrections made to the linkages will be subject to additional charges including shipping. | 
